0086-731-88112150  sales@sandegroup.com

Home>Ash Fusion Tester>SDAF105b Ash Fusion Tester

SDAF105b Ash Fusion Tester

Application:

SDAF105b Ash Fusion Tester can be used to determine the ash fusibility of coal and coke ash in power plant, coal industry, metallurgical industry, cement industry, paper manufacturing and

9 samples each batch
Automatic sample introducing / taking mechanism
Sundy Sundy

Product description

 

Highlights:

 

High automation, large number of samples/ batch.
①Unique automatic sample introducing/ taking mechanism. Operator only need to take it from the outlet under room temperature.  
②9 samples/batch. Fully automatic, test time/batch is 3 hours. Each month (22 working days) 100 samples more than normal tester.
③Applicable to different test atmosphere. Furnace temperature can be up to1600℃, applicable to ash of vast range of coal and coke.
Optimized design, Low operation cost.
①CE certified high definition camera and radiator reduce heat radiation and realize vivid picture and long service life.  
②Single layer or multilayer design for graphite cup increase utilization efficiency of graphite or bituminous coal. Test atmosphere in furnace is ensured.
③Anti-overflow slot in ash cone support can store spilled ash cone and prevent ash cone stick with the plate. 
④Furnace adopts heat resistant and heat insulation material. Imported material for combustion tube and sample boat.
⑤Heating element by silicon molybdenum rod, resist to high temperature (max. temperature 1800℃), anti-oxidation and low aging.
Real time monitor, Precise result.
①CCD camera real time monitor, new image processing algorithm, quick and accurate analysis of characteristic temperature.   
②Manual observing and camera recording of image at the same port. Good air tightness, low gas consumption.
③Gas leakage detection and alarm function make the instrument safe and reliable.
Smart control, easy to operate.
①Friendly interface, easy operation, real time display of image and data; All data can be stored, printed  and uploaded.
②Windows-based operation system for fully automated testing.
③Multi-control with CAN bus.
④Balance connection and data transfer with RS232 serial port.

Specification:

Description

SDAF105b

Standards

AS 1038-1995, ASTM D1857/D1857M/E935/935M, ISO 540,
UNI CEN/TS 15370, GB/T 219, GB/T 30726, BS 1060-1995

Sample Quantity

1~9

Temperature Ramp Rate

From 4°C until 20 °C per minutes, adjustable

Image Collection

1 frame per 1°C

Image Resolution

1080 x 1024 pixels

Temperature display

 °C / °F

Reducing Gas

CO + CO2 / H2 +  CO2

Standard Calibration

Nickel, Gold, Palladium, and Dextrin Powder

Temperature Control Range

Room temperature to 1600℃

Testing time

3 hours/ per batch(9 samples)

Resolution

1℃

Temperature Control Precision

±2℃

Test Atmosphere

Oxidizing atmosphere

Weak reducing atmosphere

Power Source

AC 220 V(-15%~10%),50/60 Hz

Dimension

550*850*843mm

Weight

108kg

Featured Products

Inquiry

Please feel free to submit your inquiry information to us. We will contact with you as soon as possible.

    Go to Top